Lighting news...a new law...but better long-term.

A gorgeous lighting plan with only energy efficient LED and halogen.

In 2013, a new law will begin to turn the lights out on the 131-year-old incandescent light bulb that we have come to associate with the warm glow of home.  Sorry David Cook...seems as though leaving a light on for you has too many environmental ramifications!    Governments around the world have passed measures to phase out incandescent light bulbs for general lighting. The aim is to encourage the use and technological development of more energy-efficient lighting alternatives, such as compact fluorescent lamp (CFLs) and LED lamps. The Department of energy has set minimum efficiency standards for lighting which phase in between 2012 and 2014

A Federal Trade Commission-mandated new

 label on light bulbs will tell you all about the 

bulbs you buy.

The Lighting Facts label on the back will

 repeat the information about brightness

 and energy cost, and add facts 

about the bulb’s life expectancy; 

light appearance—whether the light

 it shines is “warm” or “cool”—  

wattage, or the amount

 of energy the bulb uses

 and whether the bulb contains mercury.

Senate debates have stirred the pot by asking why the government should have a say in the type of light bulb people use in their homes. They've missed the point, of course, since the desire to help everyone reduce energy consumption has long-term personal,  environmental and economic benefits.   Rather simply, the replacement of incandescents with more efficient light sources is more economical.  Despite a slightly higher cost per bulb -- about $1 per bulb, with some municipalities offering rebates -- their use saves 75% of the energy cost over incandescents and has 4-5 times the longevity of incandescents;  overall costs are much improved.   Since only the bulb will change (fixtures can remain the same) the process of switching bulbs should not be difficult.   Also available - although with a higher price tag - are LEDs [light-emitting diodes] and high-efficacy halogen bulbs. 

What does this mean for you?  Keep your traditional fixtures and screw an energy-saving bulb into it. The law will not BAN incandescent bulbs, but will phase them out.  Sure, you can stockpile bulbs for a while  but why? The new bulbs offer the same light production with lower energy and maintenance costs.  Concern for the "how bright will the new bulb burn" can be addressed by reading the label.  Lumens are the measure of light output by bulbs. A typical 60 watt incandescent bulb produces 800 lumens, so simply select a CFL or halogen that is labeled at 800 lumens.   Wattage is NOT the same as a lumen but represents the energy consumed to produce the light or lumen. Wattage on CFL's  halogens and LED's will be significantly  lower since they are designed to save energy. 

Long-term, these new bulbs offer more variety in lighting and are more beneficial with improved quality of light,  lower energy consumption, and better operating and maintenance costs.  LED and other technologies are predicted to be the mainstay of lighting in the future, as they are significantly more efficient than either halogen or CFL's.  A good designer - many have been using alternative lighting for years - can guide you with the best layered lighting for task, accent and ambiance.

A GENERAL GUIDE

Halogens. Part of the incandescent family, energy-efficient halogen bulbs produce the familiar color and quality of light of  40- to 100-watt incandescent A19 bulb. New to the market, these high-efficacy halogens are energy-efficient enough to comply with the government’s new standards for lighting. They cost around $1.50 to $2 per bulb and can last for up to 2,000 hours—twice as long as a traditional incandescent.

CFLs. Much improved over the past five years, spiral-shaped compact fluorescent lamps can last up to 10,000 hours and run from $1 to $3 each, depending on burning time. Dimmable CFLs are available. They’re up to 75% more energy efficient than incandescents.

LEDs. With a life expectancy of 25,000-plus hours, light-emitting diodes are likely to be the light source of the future. Not a bulb at all, LEDs can be integrated into a fixture or even into a glass enclosure designed to look like a traditional bulb and screw into a standard light fixture. But with a high per-unit price and limited beam spread, they are more challenging for consumers to incorporate into their homes.